Oak Floor Supply and Fit Wellington Project Brief
This oak floor supply and fit Wellington project was a rewarding opportunity to work close to home. Located on the high street in Wellington, the project involved supplying and fitting a new oak floor in a busy salon. Our client wanted a durable, easy-to-maintain wooden floor that complemented existing oak flooring in other parts of the building.
We provided several samples during our initial consultation, and after careful consideration, our client selected a natural oak finish with a matt lacquer. The chosen design was classic, simple, and well-suited to the salon’s aesthetic while offering practical benefits in a high-traffic commercial setting.
Client Expectations
Our client’s requirements for this oak floor supply and fit Wellington project were clear:
- To replace the existing flooring, which consisted of old tiles and patchy subfloors, with high-quality oak flooring.
- Ensure the new oak floor matched the existing oak floors in other areas of the building.
- Provide a durable, low-maintenance surface that could handle the heavy footfall of a busy salon.
- Complete the supply and fit with minimal disruption to business operations, keeping the space clean and functional.
They were particularly concerned about durability and ease of cleaning, given the demands of a commercial environment.
Restoration and Installation Process
Our oak floor supply and fit Wellington process was carefully planned and executed over two days, ensuring a smooth installation with meticulous attention to detail.
Day One: Subfloor Preparation and Initial Installation
Upon arrival, our first focus was addressing the uneven subfloor. Some areas required leveling compound, while others needed plywood infills to create a stable, level base for the new oak flooring.
With the subfloor preparation complete, we began the installation process:
- None of the walls in the room were perfectly straight, which posed a challenge. To ensure a straight, clean installation, we marked a pencil line down the centre of the room and worked outwards from this line.
- The first two to three rows of oak flooring were carefully glued, cut, and locked together. Once in place, we weighed them down with tubs of adhesive to ensure a strong bond.
- Once the central rows were set, we laid boards simultaneously on both sides of the room, progressing efficiently while maintaining precision.
The oak boards required cuts around electrical sockets, and although beading was to be added along the skirting, we had to scribe all the end boards due to the uneven skirting boards. This called for patience, precision, and more than a few fresh blades to ensure clean, accurate cuts.
We paid special attention to areas where minor unevenness in the subfloor remained. We placed tubs of adhesive overnight on these sections, ensuring the oak flooring was firmly bonded without any bounce or movement.
By the end of day one, we had successfully installed 75% of the oak flooring, leaving the remaining tasks for the following day.
Day Two: Completing the Oak Floor Installation
On the second day of the oak floor supply and fit Wellington project, we completed the remaining flooring installation.
- The final sections of oak boards were glued and fitted, with careful attention to the last rows. Each board was cut to size and scribed to fit snugly against the walls and skirting.
- We then pinned all the beading into place along the skirting boards to provide a clean transition from wall to floor and conceal the expansion gap.
- Finally, we installed a door bar ramp at the entrance to the room, ensuring a smooth, safe threshold between rooms.
With the installation complete, we gave the entire floor a thorough clean, removing any dust or adhesive residue to reveal the beauty of the natural oak matt finish.
Oak Floor Supply and Fit Wellington Final Result
The completed oak floor supply and fit Wellington project transformed the salon. Where there were once tired old tiles and uneven flooring, there was now a warm, elegant oak floor that perfectly matched the existing woodwork elsewhere in the building.
The natural oak finish, protected by a matt lacquer, provided a clean, sophisticated look that was both practical and inviting. The flooring is now durable enough to withstand the high foot traffic of the salon and easy to maintain, ensuring it remains beautiful for years to come.
Oak Floor Supply and Fit Wellington Summary
This oak floor supply and fit Wellington case study highlights the value of expert installation and quality materials in transforming commercial spaces. From subfloor preparation to precise cutting and fitting, every stage of the project was handled with care and professionalism.
If you’re considering an oak floor supply and fit Wellington service for your home or business, our team is ready to deliver exceptional results. Contact us today to discuss how we can bring timeless elegance and practicality to your space.
Check out our Clients Testimonials
